5th World Congress on Industrial Process Tomography

Bergen, Norway

3rd - 6th September 2007

ISBN: 978 0 853 16321 3

PLENARY PAPERS

• Multiple-parameter Visualization in Combustion using Laser Diagnostic Techniques

  M. Alden (Sweden)Page 1

• Sub-micron Resolution CT for Failure Analysis And Process Development

  M. Feser (USA)Page 15

• New Micro- and Nano-Scale Imaging Methods for Fluid and Gas Transport through Porous Media

  H. Reingruber, P. Pölt and B. Holst (Norway)Page 23

• Computed Tomography of the Antikythera Mechanism

  M. Allen (UK)Page 29

TOMOGRAPHIC SENSOR DESIGN PAPERS

• Concepts for a Sub-millimetre Resolving Gamma Ray CT for Non-destructive Testing Applications

  C. Zippe (Germany), A. Bieberle, D. Hoppe, and U. HampelPage 38

• Digital Pulse Pile-up Management in Organic Liquid Scintillators

  M. D. Aspinall (UK), B. D?Mellow, R. O. Mackin, M. J. Joyce and A. J. PeytonPage 45

• EIT Measurement System with High Phase Accuracy for the Imaging of Spectral Induced Polarization Properties of Soils and Sediments

  E. Zimmermann (Germany), A. Kemna, J. Berwix and W. GlaasPage 51

• Effect of Number of Sensors on Tribo-electric Tomography System

  M. Machida (Japan) and M. KaminoyamaPage 59

• Development of an Ultra Fast Scanned Electron Beam X-ray CT

  F. Fischer (Germany), U. Hampel, M. Bieberle, E. Schleicher G. Mattausch, H. Flaske, and R. BartelPage 65

• USB-based Data Acquisition and Control System for High Speed Gamma-ray Tomography

  B. T. Hjertaker (Norway), R. Maad, O. A. Almås and G. A. JohansenPage 70

• Binary Coded Pulse Compression and its Application to Ultrasonics

  D. M. J. Cowell (UK) and S. FreearPage 78

• An Online Real-time Velocity Profiling System Using Electrical Resistance Tomography

  T. M. Long (South Africa), A. J. Wilkinson, E. W. Randall, and A. P. N. SutherlandPage 85

• Design of an Impeller Mounted Electrode Array

  S. C. Murphy (UK) and T. A. YorkPage 94

• Three-Dimensional Resistivity Imaging System

  J. Frounchi (Iran) and H. SoltaniPage 102

• Quantitative Imaging with a 2.45 GHz Planar Camera

  T. Gunnarsson (Sweden), N. Joachimowicz, A. Diet, C. Conessa, D. Aberg and J.Ch. BolomeyPage 108

• Improvement of Dual-Plane ERT System by Parallel Data Acquisition Method

  C. Tan, F. Dong (China), and B. WangPage 117

• An Approach to Detect Carbon Monoxide in Combustion Exhaust using Mid-Infrared Techniques

  S. Pal (UK), K. B. Ozanyan and H. McCannPage 124

• The Discrete Optical Tomograph including Five Projections

  M. R. Rzasa (Poland), K. Grudzien, R. Przywarski, A. Romanowski, and R. WajmanPage 133

• Analysis and Metrological Determination of the Sensitivity Distribution for a 16 Electrode Electrical Capacitance Tomography System

  A. Fuchs, D. Watzenig, H. Zangl (Austria), G. Steiner, H. Wegleiter, and G. HollerPage 141

• Photonic Guided-Path Tomography with Fibre Transducers

  N. Nurgiyatna, J. Davidson and K. B. Ozanyan (UK)Page 149

• Keynote: Fast Optical Tomography for Transient Process Diagnostics

  E. Schleicher (Germany), U. Hampel, M. Da Silva, and S. ThielePage 156

• Simulation on Sensing Field of Electromagnetic Tomography Technology

  X. Yixuan, and D. Feng (China)Page 163

• Image Optimisation for Hard-field Tomography with an Irregular and Sparse Beam Array

  J. L. Davidson, N. Terzija (UK), C. A. Garcia-Stewart, P. Wright, K. B. Ozanyan, S. Pegrum, T. J. Litt, and H. McCannPage 170

• System Design for the Control of a Tomography Instrument via an IP Link

  E. W. Randall (South Africa), T. M. Long, J. SalkinderPage 178

• A New Method for Tracking Single Radioactive Particles

  A. H. Shehata and R. P. Gardner (USA)Page 187

• Phase Sensitive Demodulation Front-End for Electrical Capacitance Tomography Applications

  H. Wegleiter, A. Fuchs, D. Watzenig, H. Zangl (Austria), and G. SteinerPage 196

DATA INVERSION AND FUSION PAPERS

• Experimental Test of a Novel Reconstruction Approach based on Irregular Grid for High-speed Gamma-ray Tomography

  V. Mosorov (Poland), R. Maad, S. Lewndowski, G. A. Johansen, and D. SankowskiPage 202

• New Hull-Voxel Approach to Image Reconstruction from Limited Projections and Views

  V. Vengrinovich (Belarus), S. Zolotarev, W. Schlegel, B. Hesse and J. HesserPage 208

• Non-Iterative reconstruction for Electrical Tomography using Second Order Back Projection

  H. Zangl (Austria), D. Watzenig, G. Steiner, A. Fuchs, and H. WegleiterPage 216

• 3-D Vector Tomography and Vector Spherical Harmonics

  A. L. Balandin (Russia)Page 224

• Ultra Wide Band Imaging Of Dielectric In The Time Domain Using Sensitivity Coefficient Based Reconstruction

  M. Z. Abdullah (UK), W. Yin, M. Bilal, D. W. Armitage, R. Mackin and A. J. PeytonPage 234

• Operators of the Interflatation of Functions of 3 Variables in the 3D Computer Tomography

  O. M. Lytvyn (Ukraine), O. O. Lytvyn, V. I. Mezhuyev, K. E. Babenko, and Y. I. PershinaPage 242

• Incomplete Data Imaging through Sinogram Restoration by Hough Transform

  E. P. A. Constantino (UK) and K. B. OzanyanPage 250

• Simulation Study on Multilayer Limited Angle Scanned Electron Beam X-ray CT arrangements for Two-phase Flow Measurements

  M. Bieberle (Germany), U Hampel, H-M Prasser, and E SchleicherPage 259

• Intel® MKL-based Trust-Region Solvers: Performance and Applications in Oil & Gas Problems

  A. V. Avdeev (Russia), Nikolay I. Gorbenko, Nikita A. ShustrovPage 265

• Bayesian Filtering based Convex Hull Criterion to estimate Multi-Phase Distributions in Electrical Process Tomography

  D. Watzenig, G. Steiner, A. Fuchs, H. Zangl (Austria), and H. WegleiterPage 272

CHEMICAL REACTOR ENGINEERING PAPERS

• Choices and Implications in Practical EIT

  D. R. Stephenson (UK), T. A. York, R. MannPage 281

• Developments in PET and PEPT at Birmingham

  D. J. Parker (UK), X. Fan, M. N. Hausard, A. Ingram, T. W. Leadbeater, and Z. YangPage 290

• Gas-Solids Flow Behaviour from X-ray Computed Tomography and Pressure Fluctuation Measurements in Various Fluidized Bed Systems

  B. Wu, G. Yu, C. Bellehumeur, and A. Kantzas (Canada)Page 297

• Study of Wall Effect on Particle Packing Structure using X-ray Micro Computed Tomography

  M. Suzuki (Japan), T. Shinmura, K. Iimura, and M. HirotaPage 304

• Measurement of FCC Catalyst Fluidization Using Capacitance CT in Petroleum Refinery Process

  T. Zhao, M. Takei (Japan), R. Ogiso, and K. NakaoPage 312

• Measurements of Liquid-Liquid Dispersion Phenomena in a Stirred Vessel using Electric Resistance Tomography

  M. Kaminoyama (Japan), K. Nishi, R. Misumi, and A. TagawaPage 321

• Tracer Fast Ascending Velocities in a Bubble Column Inferred from CARPT. Calibration Experiments

  M. S. Fraguío (Argentina), M. C. Cassanello, M. A. Cardona, D. Hojman, and H. SomacalPage 327

• Modelling, Measurement and Analysis of Fluidised Bed Dryer using an ECT Sensor

  R. S. Raghavan (UK), P. Senior, H. Wang, W. Yang and S. DuncanPage 334

• Observation of Wall Effects in Activated Carbon Filters by X-ray μCT

  A. Léonard (Belgium), H. Wullens, S. Blacher, P. Marchot, D. Toye, M. Crine, P. LodewyckxPage 342

• Wavelet Analysis of Electrical Capacitance Tomography Measurement Data from High Density Circulating Fuidized Bed

  G. Lu (China), L. Peng, and B. ZhangPage 348

• The Power Consumption Correlation in an Aerated Stirred Vessel with a Void Fraction around the Stirring Impeller based on Electrical Resistance Tomography Measurements

  M. Kaminoyama (Japan), K. Nishi, R. Misumi, A. TagawaPage 357

• Keynote: Preliminary Study on ECT Imaging of Flames in Porous Media

  S. Liu (China), Q. Chen, X. Xiong, Z. Zhang, and X. K. LiuPage 365

• CT-scan Sinograms Measurements to Study Dynamic Fluidized Bed Properties

  M. Bennett (Canada), B. Wu, S. Kryuchkov, Q. Zhang, Y. Li, D. Hodgson and A. KantzasPage 373

• Validation of DigiPac Simulations of Packed Columns Using X-ray Microtomography

  X. Jia (UK), C. Xu, R. Caulkin, R. A. Williams, H. Stitt, M. Nijemeisland, S. Aferka, M. Crine, A. Léonard, D. Toye, and P. MarchotPage 382

• Profiles of Gas Holdup in a Gas Liquid Countercurrent Bubble Column Using Electrical Resistance Tomography

  H. Jin (China), Z. Tong, S. Yang, M. Wang and R. A. WilliamsPage 390

• Effect of Particle Shape on Fluidised Bed Hydrodynamics Using X-ray Tomography and Pressure Measurement

  Q. Zhang (Canada), B. Wu, Y. Li, C. Bellehumeur, and A. KantzasPage 397

• Feedback Control of Moisture in a Batch Fluidised Bed Dryer Using Tomographic Sensor

  J. A. Villegas (UK), M. Li, S.R. Duncan, H.G. Wang and W.Q. YangPage 405

• Investigation of Liquor Flow in a Model Kraft Batch Digester

  Q. F. Lee and C. P. J. Bennington (Canada)Page 414

• The Application of Flame Tomography to Improve Combustion Systems

  C. Ellul, M. Pourkashanian, M. Wang (UK) and A. WilliamsPage 423

INDUSTRIAL APPLICATION AND INNOVATION PAPERS

• EIT Detection of Juvenile and Knot Wood in Southern Pine Trees

  P. H. Steele (USA), J. E. Cooper, B. K. Mitchell, C. Boden and W. R. B. LionheartPage 431

• ERT for Characterisation of Physical Stability in Liquid Compositions

  T. York (UK), J. Davidson, M. Flanagan, and A. KowalskiPage 439

• Hazard of Electrostatic Generation in Pneumatic Conveying System: Electrostatic Effects on the Accuracy of Electrical Capacitance Tomography Measurements

  Y. Zhang (Singapore), Y. C. Liang and C. H. WangPage 447

• Ultrasonic Measurements in Fish-water Pipe Flows

  A. C. Baker, J. Spilde, O. Brix, R. Grüner, and K. E. Frøysa (Norway)Page 456

• A Hardware Accelerator for Electrical Resistance Tomography System

  J. Frounchi (Iran), K. S. Zamini, H. Taghipour, M. H. Zarifi and H. SoltaniPage 464

• Porosity of Concrete by Computed Tomography

  S. Caliskan (UK)Page 470

• Neutral Buoyancy Tracer in Gas Cleaning Equipment- A Case Study

  W. Peng, S. Jacobsson and A. C. Hoffmann (Norway)Page 479

• Electrical Impedance Tomography (EIT) Imaging of Solid-liquid Suspensions using Vertically Deployable Sensor Electrode Arrays

  S. C. Murphy (UK), S. J. Stanley, D. Rhodes and T. A. YorkPage 487

• PXI-based Electrical Capacitance Tomographic Imaging System applied to Flow Control and Mass Flow Measurement

  R. Deloughry (UK), I. Ibrahim, P.V.S Ponnapalli, P. Lingard, and D. BenchebraPage 495

• Industrial Computed Tomography System with High Energy Gamma-Ray Beam

  H. Toyokawa (Japan), H. Kanada, R. Kuroda, T. Kaihori, K. Yamada, and T. UomotoPage 503

• μCT Based Measurements of the Characteristic Lengths of Polyurethane Foams Employed in the Automotive Industry for Noise Control Applications

  L. Bregant, S. Favretto (Italy), and C. BertoliniPage 511

• Soil Water Infiltration Measurements Using Electrical Impedance Tomography

  J. A. Gutiérrez Gnecchi (Mexico), E. Marroquín Pineda, A. Gómez-Tagle Chávez, A. Gómez-Tagle Rojas, and J. Correa GómezPage 521

• A Positron Camera with Flexible Geometry for the Study of Industrial Processes

  T. W. Leadbeater (UK), and D. J. ParkerPage 529

• Feasibility study of NIR diffuse optical tomography on agricultural produce

  E. K. Kemsley, H. S. Tapp (UK), R. Binns, R. O. Mackin and A. J. PeytonPage 538

NEW MODALITIES AND MULTI-MODALITY TOMOGRAPHY PAPERS

• Keynote: Prompt Gamma-ray Imaging

  L. Xu and R. P. Gardner (USA)Page 547

• nanoCT: Visualising of Internal 3D-Structures with Submicrometer Resolution

  O. Brunke (Germany), A. Egbert, and D. NeuberPage 555

• Linear EMT for the Detection of Faults in Metallic Planar Structures (DIF)

  W. Yin (UK), X. Ma, G. Zysko and A. J. PeytonPage 560

• Design of a Twin-plane Sensor with Internal Electrodes for Flow Measurement

  X. H. Hu (UK), M. Yang and W. Q. YangPage 568

• A Novel Detector for Estimation of Induced Loss in the Measuring Volume of Multiphase Flows

  O. A. Vasdal and E. A. Hammer (Norway)Page 577

• Muon Imaging 1: Detecting the Frequency and Location of Cosmic Ray Muon Events to Enable the Development of a Muon Based Imaging System

  S. J. Stanley (UK), D. Rhodes, P. M. Jenneson, W. B. Gilboy and S. J. R. SimonsPage 585

• Modeling of an ECT/ERT Dual-modality Tomography Sensor for Oil/Gas/Water Threecomponent Flow Measuring

  P. Jiang, L. Peng, G. Lu (China), D. Xiao, and H. WangPage 592

• Ultra Wide Band Tomography ? Experimental Hardware and Image Reconstruction

  M. Bilal (UK), W. Yin, M. Z. Abdullah, D. W. Armitage and A. J. PeytonPage 599

• The Use of Multi-modal Tomography in the Study of Boehmite Precipitation

  I. Edwards (UK), S. A. Axon, M. Barigou, R. Mann, D. R. Stephenson, E. H. StittPage 607

• The Study of a 2D Model for Dual Mode Excitation Electrical Tomography

  Z. Cao (China), H. Wang, S. LiuPage 617

• Capacitance Wire-mesh Tomograph for Multiphase Flow Applications

  M. J. da Silva (Germany), E. Schleicher, and U. HampelPage 624

• Process Impedance Spectroscopy through Chirp Waveform Excitation

  M. Nahvi (UK) and B. S. HoylePage 630

• Analysis of the Noise Influence on the Quality of the Reconstruction in the Dual Modality Tomography

  J. Wlodarczyk (Poland), D. SankowskiPage 639

• Muon Imaging 2: Two Dimensional Density Mapping using Naturally Occurring Cosmic Ray Muons

  S. J. Stanley (UK), D. Rhodes, P. M. Jenneson, W. B. Gilboy and S. J. R. SimonsPage 644

• Design and Appraisal of the M3000 Multimodal Tomography System

  H. I. Schlaberg (UK), C. Qiu, F. J. W. Podd, X. Jia, K. Primrose, G. BoltonPage 652

MULTI-PHASE FLOW IMAGING PAPERS

• Keynote: State Estimation in Process Tomography – Experimental Study in 3D Multiphase Flow Case

  A. Seppänen (Finland), A. Peltola, L. Heikkinen, J. Kourunen and J. P. KaipioPage 659

• Application of Alternating- Minimization (A-M) in Dual Source Gamma Ray Computer Tomography for Imaging Three Phase System

  R. Varma (USA), J. A. O’Sullivan and M. H. Al-DahhanPage 668

• Application of an ANN-based Controller for the Control of Pneumatic Conveyed Polypropylene Pellet Flow

  P. V. S. Ponnapalli, D. Benchebra (UK), R. Deloughry, and I. IbrahimPage 677

• High Resolution Gamma Ray Tomography of a Rotating Hydrodynamic Coupling

  U. Hampel (Germany), A. Bieberle, E. Schleicher, C. Zippe, D. Hoppe, K.-H. Diele, and R. KernchenPage 683

• On- line Visualization of Asymmetric Multi-phase Flow in an Industrial Flow Loop Using Electrical Tomographic Techniques

  C. Qiu, R. Bagatin, S. Palmery (Italy), and G. BoltonPage 690

• Development of High Speed PIV using Dual-Camera

  M. Yamada (Japan), K. Sakakibara, Y. Miyamoto and T. SaitoPage 699

• Analysis of Digital Speckle Tomography for Reconstruction of Density Distribution of Unsteady and Asymmetric Flow

  S. H. Baek, Y-J. Kim, H. S. Ko (Korea)Page 707

• Mathematical Modelling of Flow Parameters in an Oscillatory Baffled Reactor (OBR) through Electrical Impedance Tomography (EIT)

  G. Vilar (UK), R. A. Williams, M. Wang and R. J. TweediePage 715

• Keynote: Multiphase Flow Measurement in Oil and Gas Production

  C-G. Xie (UK), I Atkinson, C LennPage 723

• Comparing ERT Measurements with CFD Predictions for an Industrial Scale hydrocyclone classifier

  M Brennan, P Holtham, M Khanal and R. Morrison (Australia)Page 737

• Graphical Presentation of Transformation of Tomography Data for Gravitation Silo Flow

  Z. Chaniecki, M. Niedostatkiewicz, D. Sankowski (Poland)Page 356

• Real Time Volumetric Imaging of Multiphase Flows Using Electrical Capacitance Volume-Tomography (ECVT)

  W. Warsito, Q. Marashdeh (USA), and L. S. FanPage 755

• Phase Distribution Measurements in Metallic Foam using X-ray Radiography and Micro-tomography

  D. Toye, S. Aferka, S. Calvo, M. Crine, A. Léonard, A. Saroha and P. Marchot (Belgium)Page 761

• A Novel Subsea On-line Multiphase Fluid Sampling and Analysis System

  A. Baker, C. Bjelland, J. Spilde, K-E. Frøysa, M. B. Holstad (Norway), G. A. Johansen, B. T. Hjertaker, B. Berntsen and S. H. StavlandPage 768

• Measurement of Ice Movement in Water using Electrical Capacitance Tomography

  J. Fan (China), L. Jing, and S. LiuPage 776

• Average Particle Size and Instantaneous Mass Flow Rate Estimation in Dilute Phase Pneumatic Conveying Systems using ECT

  U. Datta (Norway) and S. MylvaganamPage 784

• Keynote: A Study of Surfactant Effects on the Liquid-Phase Motion around a Zigzagging Ascent Bubble Using Recursive Cross Correlation PIV

  T. Saito (Japan), K. Sakakibara, K. Miyamoto and M. YamadaPage 793

• Imaging of Mixing of Two Miscible Liquids using Electrical Impedance Tomography

  J. Kourunen, L. M. Heikkinen (Finland), M. Vauhkonen, R. Käyhkö, J. Matula, and J. KäyhköPage 803

• Application of Ultrasonic Time-Domain Correlation Method to Two Phase Flow Measurements

  T. Hayashida (Japan), H. Murakawa, H. Kikura, M. Aritomi, and M. MoriPage 810

• A Method of Flow Characterisation Based on Continuity Theory

  M. Wang (UK) and V. ShirhattiPage 816

• Solid in Liquid Content Measurement using Ultrasound Attenuation

  Q. A. Chen, D. M. J. Cowell, and S. Freear (UK)Page 820

• Multiphase Flow Parameters Determination from USG Image Reconstruction

  J. Nowakowski (Poland), and D. KaczorowskiPage 827

INTERACTIVE POSTER SESSION PAPERS

• Gamma Ray Computed Tomography for Fast Rotating Objects

  A. Bieberle (Germany), U. HampelPage 832

• Ultrasonic Signal Characteristics in the Presence of Highly Reflecting Solid/liquid Interfaces

  D. M. J. Cowell (UK) and S. FreearPage 837

• A Novel Fully Differential Current Source for EIT/EIS Systems

  J. Frounchi (Iran), M. H. Zarifi, and F. DehkhodaPage 843

• 2-D Electrical Resistance Tomography System with Zooming Mechanism

  J. Frounchi (Iran) and H. SoltaniPage 850

• Approximation Errors in Electrical Impedance Tomography ? An Experimental Study

  A. Nissinen, L. M. Heikkinen (Finland) and J. P. KaipioPage 858

• An Electrical Impedance Sensing System for Monitoring Hydraulic Flow Transport in Heap Leach Test Columns

  R. Hurry (UK), M. Wang, R. A. Williams, C. CrossPage 865

• “Hard-field” Temperature Imaging by Guided Path Tomography

  S. G. Castillo and K. B. Ozanyan (UK)Page 873

• Digital Balanced Detection for Fast Optical CT in Fluidised Beds

  R. Hafiz and K. Ozanyan (UK)Page 879

• The Capacitive Tomograph of Higher Sensitivity Near the Sensor Wall

  M. R. Rzasa (Poland), R. Wajman, K. Grudzien, and A. RomanowskiPage 887

• Requirements and Performance of Process ERT Instruments

  D. R. Stephenson (UK), T. A. York, and R. MannPage 895

• BPF-based Reconstruction Algorithm for Multiple Rotation-translation Scan Mode

  M. Chen, H. Zhang, Y. Sun and P. Zhang (China)Page 902

• Planar Electromagnetic Sensor for Inspecting Low Conductivity Material

  G. Zysko (UK), C. Ktistis, W. Yin, A. J. Peyton and R. DennoPage 911

• Simulation of Fast X-Ray Industrial Tomographic Imaging from Limited Projection Data Using Elastic Matching Technique

  V. Vengrinovich (Belarus), Y. Denekevich, W. Schegel and B-M. HessePage 918

• High-speed Chemical Species Tomography in a Multi-cylinder Automotive Engine

  P. Wright (UK), N. Terzija, J. L. Davidson, S. Garcia-Castillo, C. Garcia-Stewart, S. Pegrum, S. Colbourne, P. Turner, S. D. Crossley, T. Litt, S. Murray, K. B. Ozanyan and H. MPage 925

• Dynamic Magnetic Induction Tomography Imaging of Molten Metal Flow using the Kalman Filter

  M. Soleimani, X. Ma, and A. J. Peyton (UK)Page 934

• Visualisation and Image Analysis Problems in Multipath Ultrasonic Tomography

  K. Polakowski (Poland), and J. SikoraPage 941

• Antenna Design for Ultra-wideband (UWB) Electromagnetic Tomography

  D. W. Armitage (UK), W. Yin, M. Z. Abdullah, M. Bilal and A. J. PeytonPage 949

• High resolution computed tomography for industrial applications based on coherent fiber optics ribbons

  M. Bettuzzi (Italy), R. Brancaccio, A. Berdondini, M. P. Morigi, F. Casali, A. Flisch, and A. MiceliPage 958

• Comparison of Two Methods for Tomographic Imaging from Severely Incomplete Data

  E. P. A. Constantino (UK), J. L. Davidson and K. B. OzanyanPage 965

• Compact Electromagnetic Calorimeter

  G. Eigen (Norway), R. Grüner, D. Röhrich, and K. UllalandPage 973

• Investigation of Prompt Gamma-Ray Neutron Activation Analysis for Determining Phase Amounts in Multiphase Flow

  A. M. Mutiso, G. A. Johansen, and R. P. Gardner (USA)Page 979

• Hopper Flow Measurement Data Visualization: Developments Towards 3D

  A. Romanowski, K. Grudzie? (Poland), R. Banasiak, R. A. Williams, D. SankowskiPage 986

• A Filtering Approach for Hydrological Process Monitoring with Approximation Error Method

  A. Lehikoinen, S. Finsterle, J. M. J. Huttunen, A. Voutilainen, M. B. Kowalsky, and J. P. Kaipio (Finland)Page 994

• Detection of Flammable and Explosive Liquids Inside Sealed Vessels Using Quasistatic Electrical Tomography

  A. Korjenevsky (Russia)Page 1002

• Developments of Multiple Frequency Electromagnetic Induction System for Steel Flow Visualization

  X. Ma (UK), A. J. Peyton, S. R. Higson, P. DrakePage 1007

• Toward a Volume Tomography Multimodal System Based on ECT Sensor

  Q. Marashdeh (USA), W. Warsito, and L. S. FanPage 1015

• Correlation of Electromagnetic Flow Meter, Electrical Resistance Tomography and Mechanistic Modelling for a New Solution of Solid Slurry Measurement

  J. Y. Xu, M. Wang (UK), B. Munir, H. I. Oluwadarey, H. I. Schlaberg, Y. X. Wu, and R. A. WilliamsPage 1021

• Wideband Electrical Impedance Tomography Simulation Study

  M. Nahvi (UK) and B. S. HoylePage 1030

• Virtual Projections Technique for Limited Angle Tomography

  A.V. Likhachev, O. E. Trofimov (Russia), V. L. Vengrinovich, and S. A. ZolotarevPage 1038

OIL AND GAS APPLICATIONS PAPERS

• Developments in Magnetic Induction Tomography for Oil-Industry Applications

  S. Watson, C. Ktistis, B. Dekdouk, D. W. Armitage, A. J. Peyton (UK), R. J. Williams and H. GriffithsPage 1045

• Complementary Imaging of Oil Recovery Mechanisms in Fractured Reservoirs

  G. Ersland (Norway), M. Fernø, A. Graue, B.A. Baldwin, and J. StevensPage 1051

• Water Detection in Dry Gas/condensate Flows by SeCaP Technology

  H. K. Kvandal, S. A. Kjølberg and R. B. Schüller (Norway)Page 1059

• Measuring Gas Hydrate – CO2 Exchange in Bentheim Sandstone Using MRI Tomography and IDL-programming

  G. Ersland (Norway), J. Husebø, A. Graue, B.A. Baldwin, J. Howard and J. StevensPage 1068

• Challenges for an Ultrasonic Interface Detection System for Offshore Separators

  K-E. Frøysa (Norway), E. Bjørndal and I. KlepsvikPage 1075

• Semi-empirical Scatter Correction Models for High Speed Gamma-ray Tomography

  R. Maad (Norway), B. T. Hjertaker, and G. A. JohansenPage 1083

VISUALISATION AND IMAGE ANALYSIS PAPERS

• Comparing Analysis of Image Visualisation Accuracy of Electrical Capacitance Tomography and Gamma Tomography

  R. Maad (Norway), D. Sankowski, K. Grudzien, R.Wajman, V. Mosorov, G. A. and JohansenPage 1090

• Application of Charge Simulation Method (CSM) for ECT Imaging in Forward Problem and Sensitivity Matrix Calculation

  R. Banasiak (Poland), L. Mazurkiewicz, and R. WajmanPage 1099

• Adaptive 3D thinning Algorithm to Detect Bridging Ligaments during Intergranular Stress Corrosion Cracking of Stainless Steel

  M. Janaszewski, T. J. Marrow and L. Babout (Poland)Page 1107

• Updating Sensitivity Maps in Landweber Iteration for Electrical Capacitance Tomography

  Y. Li (UK) and W. Q. YangPage 1116

• 3D Reconstruction of Ten Thousand Particle Trajectories in Real-time

  J. Alme, S. Bablok, M. Richter, D. Röhrich (Norway), K. Ullaland, B. Wagner, G. ØvrebekkPage 1124

• Wavelet Enhanced Visualization of Solids Distribution in the Top of CFBs

  X. Xiong, Z. Zhang, S. Liu (China) and J. LeiPage 1130

• Characterization and Analysis of Porous, Brittle Solid Structures by Micro CT

  C. L. Lin, A. R. Videla, Q. Yu, and J. D. Miller (USA)Page 1136

Copyright © 2022 International Society for Industrial Process Tomography

Contact: admin@isipt.org

Site design by Aggelia